MODIFIKASI KOEFISIEN DAYA DUKUNG AKSIAL PONDASI TIANG BERDASARKAN BACK ANALYSIS PADA DATA LOADING TEST
Abstract
The axial bearing capacity of the pile foundation is needed to determine the number of foundations required to carry the structural load. Calculation of the axial bearing capacity pile foundation produces a carrying capacity different from the results of loading tests in the field. The difference between the bearing capacity design with loading test result can make a waste of the number of poles used. To make effective use of the number of piles, the bearing capacity design is necessary to modify the coefficient so that bearing capacity design is closer to the results of the loading test. The result of the modification the bearing capacity of the clay soil in an increase that is not much different from the initial coefficient but is strongly influenced by the value of the internal friction angle which can make the coefficient increase twice. For cohesionless soil, ultimate base resistance there is an average value of 56.75 tsf for N-SPT 50.
Keywords: Bearing capacity, Coefficient, modification, Loading test, Pile foundation
Keywords
Full Text:
PDFReferences
Bouafia, A., & Derbala, A. (2002). Assessment of SPT-based method of pile bearing capacity–analysis of a database. In Proceedings of the International Workshop on Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance-Based Design (pp. 369-374).
Das, B. M. (1995). Mekanika tanah (prinsip-prinsip rekayasa geoteknis) Jilid 1 Alih Bahasa oleh Ir. Noor E. Mochtar. M. Sc (Doctoral dissertation, Ph. D. dan Ir. Indrasurya B. Mochtar M. Sc., Ph. D. Jakarta: Erlangga).
Dias, T. G. S., & Bezuijen, A. (2018). Load-transfer method for piles under axial loading and unloading. Journal of Geotechnical and Geoenvironmental Engineering, 144(1), 04017096.
Dussa, P. S., & Mujawar, K. C. (2016). New approach for determination of bearing capacity of soil using direct shear test (Lab test). Int J Innov Eng Technol (IJIET), 7, 426-430.
Fakharian, K., & Khanmohammadi, M. (2022). Effect of OCR and Pile Diameter on Load Movement Response of Piles Embedded in Clay over Time. International Journal of Geomechanics, 22(7), 04022091.
Kosasi, M., Wijaya, D. H., & Budi, G. S. (2014). Korelasi daya dukung pondasi tiang antara static loading test dengan pile driving analyzer. Jurnal Dimensi Pratama Teknik Sipil, 3(2).
Mijena, E. H. (2012). A comparison of friction piles bearing capacity based on theoretical and empirical mathematical models (Master's thesis, Institutt for bygg, anlegg og transport).
Nurdian, S., Setyanto, S., & Afriani, L. (2015). Korelasi parameter kekuatan geser tanah dengan menggunakan uji triaksial dan uji geser langsung pada tanah lempung substitusi pasir. Jurnal Rekayasa Sipil Dan Disain (JRSDD), 3(1), 13-25.
Sekaran, U., Lai, L., Ussiri, D. A., Kumar, S., & Clay, S. (2021). Role of integrated crop-livestock systems in improving agriculture production and addressing food security–A review. Journal of Agriculture and Food Research, 5, 100190.
Sundaram, R., & Gupta, S. (2016). Back-analysis of pile load test results–a case study. ISRM India Journal-Half Yearly Technical Journal of Indian National Group of ISRM, 5(2), 30-35.
Thai, P. B., Nguyen, D. D., Thi, Q. A. B., Nguyen, M. D., Vu, T. T., & Prakash, I. (2022). Estimation of load-bearing capacity of bored piles using machine learning models. Vietnam Journal of Earth Sciences, 44(4).
Xiao, D., & Yang, H. (2011). Back analysis of static pile load test for SPT-based pile design: a Singapore experience. In Advances in Pile Foundations, Geosynthetics, Geoinvestigations, and Foundation Failure Analysis and Repairs (pp. 144-152).
Zumrawi, M. M., & Elnour, H. (2016). Predicting bearing strength characteristics from soil index properties. International Journal of Civil Engineering and Technology, 7(2), 266-277.
DOI: https://doi.org/10.17509/k.v20i1.52339
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Universitas Pendidikan Indonesia (UPI)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal Teknik Sipil
KOKOH