Towards Sustainable Wind Energy: A Systematic Review of Airfoil and Blade Technologies Over the Past 25 Years for Supporting Sustainable Development Goals (SDGs)

Anupam Krishnan, Abdulkareem Sh. Mahdi Al-Obaidi, Lee Ching Hao

Abstract


Wind energy is vital for transitioning to renewable sources, reducing reliance on fossil fuels, and mitigating climate change. Harnessing wind power provides sustainable solutions to meet global energy demands. The systematic review provides valuable insights into recent advancements in blade design for wind turbines, crucial for optimizing efficiency, and sustainability in wind energy systems. The study emphasized advancements in Horizontal Axis Wind Turbines, concentrating on efficiency enhancements with numerical simulations and optimization strategies. Additionally, it explored developments in Vertical Axis Wind Turbine technology, notably hybrid rotor systems, and primarily utilized wind turbine airfoils over the past 25 years. Many researchers focused on optimizing aerodynamic systems using advanced numerical simulations, experiments, and optimization techniques, stressing the significance of achieving optimal lift-to-drag ratios. Furthermore, factors like bend-twist coupling and stall characteristics to prolong turbine lifespan and maximize power extraction were investigated. The interdisciplinary nature of wind energy research emphasizes collaborative efforts to address challenges and foster innovation, driving progress toward sustainable development goals. This review also supports current issues in the sustainable development goals (SDGs).

Keywords


Bibliometric analysis; Horizontal and Vertical Axis Wind Turbine; Lift-to-Drag ratio; Stall characteristics; Sustainable Development Goals; Systematic review

Full Text:

PDF

References


Abdullah, M. A. M., Man, M. S., Nyan, P. S., Saufi, S. M., and Abdullah, S. B. (2019). Potential thermo-responsive ionic liquid as draw solution in forward osmosis application. Journal of Engineering Science and Technology, 14(2), 1031–1042.

Acarer, S. (2020). Peak lift-to-drag ratio enhancement of the DU12W262 airfoil by passive flow control and its impact on horizontal and vertical axis wind turbines. Energy, 201, 117659.

Al Husaeni, D. F., and Nandiyanto, A. B. D. (2022a). Bibliometric computational mapping analysis of publications on mechanical engineering education using vosviewer. Journal of Engineering Science and Technology, 17(2), 1135–1149.

Al Husaeni, D. F., and Nandiyanto, A. B. D. (2022b). Bibliometric using vosviewer with publish or perish (using google scholar data): From step-by-step processing for users to the practical examples in the analysis of digital learning articles in pre and post covid-19 pandemic. ASEAN Journal of Science and Engineering, 2(1), 19–46.

Alawad, N. A., Humaidi, A. J., Al-Obaidi, A. S. M., and Alaraji, A. S. (2022). Active disturbance rejection control of wearable lower-limb system based on reduced ESO. Indonesian Journal of Science and Technology, 7(2), 203–218.

Alhasnawi, B. N., and Jasim, B. H. (2020). A new energy management system of on-grid/off-grid using adaptive neuro-fuzzy inference system. Journal of Engineering Science and Technology, 15, 3903-3919.

Amiri, M. M., Shadman, M., and Estefen, S. F. (2024). A review of physical and numerical modeling techniques for horizontal-axis wind turbine wakes. Renewable and Sustainable Energy Reviews, 193(2023), 114279.

Anggraeni, S., Girsang, G. C. S., Nandiyanto, A. B. D., and Bilad, M. R. (2021). Effects of particle size and composition of sawdust/carbon from rice husk on the briquette performance. Journal of Engineering Science and Technology, 16(3), 2298–2311.

Anggraeni, S., Nandiyanto, A. B. D., and Usdiyana, D. (2023). Project effectivity of adsorbent from food waste for handling wastewater as a learning strategy to learning achievement of education for sustainable development and inquiry abilities. Journal of Engineering Science and Technology, 18(5), 2597–2614.

Anwar, S., Warizal, W., Mubarakah, S. L., and Hastuti, A. (2023). Research trends of control accounting systems in the industry: A bibliometric analysis. Journal of Engineering Science and Technology, 18(6), 25–32.

Asadbeigi, M., Ghafoorian, F., Mehrpooya, M., Chegini, S., and Jarrahian, A. (2023). A 3D study of the darrieus wind turbine with auxiliary blades and economic analysis based on an optimal design from a parametric investigation. Sustainability, 15(5), 4684.

Ashel, H., Hamidah, I., Anwar, S., and Muslim, M. (2023). Research trends of mental models and opportunity in science education: A bibliometric analysis. Journal of Engineering Science and Technology, 18(6), 70–80.

Babu, N. R., and Arulmozhivarman, P. (2013). Wind energy conversion systems - A technical review. Journal of Engineering Science and Technology, 8(4), 493–507.

Balat, M. (2009). A review of modern wind turbine technology. Energy Sources, Part A, 31(17), 1561-1572.

Balduzzi, F., Zini, M., Molina, A. C., Bartoli, G., De Troyer, T., Runacres, M. C., Ferrara, G., and Bianchini, A. (2020). Understanding the aerodynamic behavior and energy conversion capability of small darrieus vertical axis wind turbines in turbulent flows. Energies, 13(11), 1–15.

Ballesteros-Coll, A., Portal-Porras, K., Fernandez-Gamiz, U., Zulueta, E., and Lopez-Guede, J. M. (2021). Rotating microtab implementation on a DU91W250 airfoil based on the cell-set model. Sustainability, 13(16), 9114.

Basnur, J., Fakhri, M., Putra, F., Vee, S., Jayusman, A., and Zulhilmi, Z. (2024). Sustainable packaging: Bioplastics as a low-carbon future step for the sustainable development goals (SDGs). ASEAN Journal for Science and Engineering in Materials, 3(1), 51–58.

Beyhaghi, S., and Amano, R. S. (2019). Multivariable analysis of aerodynamic forces on slotted airfoils for wind turbine blades. Journal of Energy Resources Technology, 141(5), 051214.

Bhuyan, S., and Biswas, A. (2014). Investigations on self-starting and performance characteristics of simple H and hybrid H-Savonius vertical axis wind rotors. Energy Conversion and Management, 87, 859–867.

Bianchini, A., Balduzzi, F., Ferrara, G., and Ferrari, L. (2017). Aerodynamics of Darrieus wind turbines airfoils: The impact of pitching moment. Journal of Engineering for Gas Turbines and Power, 139(4), 042602.

Bianchini, A., Balduzzi, F., Ferrara, G., Ferrari, L., Persico, G., Dossena, V., and Battisti, L. (2018). Detailed analysis of the wake structure of a straight-blade H-Darrieus wind turbine by means of wind tunnel experiments and computational fluid dynamics simulations. Journal of Engineering for Gas Turbines and Power, 140(3), 032604.

Boadu, S., and Otoo, E. (2024). A comprehensive review on wind energy in Africa: Challenges, benefits and recommendations. Renewable and Sustainable Energy Reviews, 191(June 2023), 114035.

Boopathi, D., Sonthalia, A., and Devanand, S. (2017). Experimental investigations on the effect of hydrogen induction on performance and emission behaviour of a single cylinder diesel engine fuelled with palm oil methyl ester and its blend with diesel. Journal of Engineering Science and Technology, 12(7), 1972–1987.

Chen, X., and Agarwal, R. (2013). Optimization of flatback airfoils for wind turbine blades. Aircraft Engineering and Aerospace Technology, 85(5), 355–365.

De Fezza, G., and Barber, S. (2022). Parameter analysis of a multi-element airfoil for application to airborne wind energy. Wind Energy Science, 7(4), 1627–1640.

Domel, A. G., Saadat, M., Weaver, J. C., Haj-Hariri, H., Bertoldi, K., and Lauder, G. V. (2018). Shark skin-inspired designs that improve aerodynamic performance. Journal of the Royal Society Interface, 15(139), 1–9.

Eftekhari, H., Mahdi Al-Obaidi, A. S., and Eftekhari, S. (2022). Aerodynamic performance of vertical and horizontal axis wind turbines: A comparison review. Indonesian Journal of Science and Technology, 7(1), 65–88.

Eltayesh, A., Castellani, F., Natili, F., Burlando, M., and Khedr, A. (2023). Aerodynamic upgrades of a Darrieus vertical axis small wind turbine. Energy for Sustainable Development, 73, 126–143.

Erfort, G., von Backström, T. W., and Venter, G. (2021). Adaptive surface distortions for torque ripple control in vertical-axis wind turbines. Wind Engineering, 45(2), 125–137.

Febrianto, A. S., Indriarti, R., Faldesiani, R., Addinna, D., Hernawan, Y., Suryadi, E., and Suryadi, G. G. (2023). Using vosviewer for a bibliometric computational mapping analysis of publications on communication technology. Journal of Engineering Science and Technology, 18(6), 2748–2762.

Gao, Q., Lian, S., and Yan, H. (2022). Aerodynamic performance analysis of adaptive drag-lift hybrid type vertical Axis wind turbine. Energies, 15(15), 5600.

Gemil, K. W., Na’ila, D. S., Ardila, N. Z., and Sarahah, Z. U. (2024). The relationship of vocational education skills in agribusiness processing agricultural products in achieving sustainable development goals (SDGs). ASEAN Journal of Science and Engineering Education, 4(2), 181–192.

Gupta, A., Abderrahmane, H. A., and Janajreh, I. (2024). Flow analysis and sensitivity study of vertical-axis wind turbine under variable pitching. Applied Energy, 358, 122648.

Habali, S. M., and Saleh, I. A. (2000a). Local design, testing and manufacturing of small mixed airfoil wind turbine blades of glass fiber reinforced plastics. Part I: design of the blade and root. Energy Conversion and Management, 41(3), 249–280.

Habali, S. M., and Saleh, I. A. (2000b). Local design, testing and manufacturing of small mixed airfoil wind turbine blades of glass fiber reinforced plastics. Part II: manufacturing of the blade and rotor. Energy Conversion and Management, 41(3), 281–298.

Hao, L., Hu, B., Gao, Y., and Wei, B. (2023). Effect of vortex generator spanwise height distribution pattern on aerodynamic characteristics of a straight wing. Advances in Aerodynamics, 5(1), 1–15.

Hassan, S., Kee, L. S., and Al-Kayiem, H. H. (2013). Experimental study of palm oil mill effluent and oil palm frond waste mixture as an alternative biomass fuel. Journal of Engineering Science and Technology, 8(6), 703–712.

He, Y., Sun, J., Song, P., Wang, X., and Usmani, A. S. (2020). Preference-driven Kriging-based multiobjective optimization method with a novel multipoint infill criterion and application to airfoil shape design. Aerospace Science and Technology, 96, 105555.

Hirata, K., Nozawa, R., Kondo, S., Onishi, K., and Tanigawa, H. (2016). On high-performance airfoil at very low reynolds number. Journal of Robotics and Mechatronics, 28(3), 273–285.

Hou, L., Shen, S., and Wang, Y. (2021). Numerical study on aerodynamic performance of different forms of adaptive blades for vertical axis wind turbines. Energies, 14(4), 880.

Husain, S. S., Kadhim, M. Q., Al-Obaidi, A. S. M., Hasan, A. F., Humaidi, A. J., and Al Husaeni, D. N. (2023). Design of robust control for vehicle steer-by-wire system. Indonesian Journal of Science and Technology, 8(2), 197–216.

Huynh, D. C., HO, L. D., and Dunnigan, M. W. (2021). Optimization of economic environmental and social benefits for integrated energy systems. Journal of Engineering Science and Technology, 16(2), 1196–1212.

Indragandhi, V., Subramaniyaswamy, V., and Logesh, R. (2017). Topological review and analysis of DC-DC boost converters. Journal of Engineering Science and Technology, 12(6), 1541–1567.

Maulana, I., Asran, M. A., and Ash-Habi, R. M. (2023). Implementation of sustainable development goals (SDGs) no. 12: Responsible production and consumption by optimizing lemon commodities and community empowerment to reduce household waste. ASEAN Journal of Community Service and Education, 2(2), 141-146.

Jo, B. W., and Majid, T. (2022). Aerodynamic analysis of camber morphing airfoils in transition via computational fluid dynamics. Biomimetics, 7(2), 52.

Kaharudin, K. E., Salehuddin, F., Zain, A. S. M., and Roslan, A. F. (2019). Effect of channel length variation on analog and rf performance of junctionless double gate vertical mosfet. Journal of Engineering Science and Technology, 14(4), 2410–2430.

Kang, T. J., and Park, W. G. (2013). Numerical investigation of active control for an S809 wind turbine airfoil. International Journal of Precision Engineering and Manufacturing, 14(6), 1037–1041.

Kannan, T. S., Mutasher, S. A., and Lau, Y. H. K. (2013). Design and flow velocity simulation of diffuser augmented wind turbine using CFD. Journal of Engineering Science and Technology, 8(4), 372–384.

Keisyafa, A., Sunarya, D. N., Aghniya, S. M., and Maula, S. P. (2024). Analysis of student’s awareness of sustainable diet in reducing carbon footprint to support sustainable development goals (SDGs) 2030. ASEAN Journal of Agriculture and Food Engineering, 3(1), 67–74.

Khaleel, H. Z., Ahmed, A. K., Al-Obaidi, A. S. M., Luckyardi, S., Husaeni, D. F. Al, Mahmod, R. A., and Humaidi, A. J. (2024). Measurement enhancement of ultrasonic sensor using pelican optimization algorithm for robotic application. Indonesian Journal of Science and Technology, 9(1), 145–162.

Koca, K., Genç, M. S., and Ertürk, S. (2022). Impact of local flexible membrane on power efficiency stability at wind turbine blade. Renewable Energy, 197, 1163–1173.

Krawczyk, P., Beyene, A., and Macphee, D. (2013). Fluid structure interaction of a morphed wind turbine blade. International Journal of Energy Research, 37(14), 1784–1793.

Krishnan, A., Al-Obaidi, A. S. M., and Hao, L. C. (2023). A comprehensive review of innovative wind turbine airfoil and blade designs: Toward enhanced efficiency and sustainability. Sustainable Energy Technologies and Assessments, 60, 103511.

Kusuma, Y. F., Fuadi, A. P., Hakim, B. Al, Sasmito, C., Nugroho, A. C. P. T., Khoirudin, M. H., Priatno, D. H., Tjolleng, A., Wiranto, I. B., Al Fikri, I. R., Muttaqie, T., and Prabowo, A. R. (2024). Navigating challenges on the path to net zero emissions: A comprehensive review of wind turbine technology for implementation in Indonesia. Results in Engineering, 22, 102008.

Lagdani, O., Tarfaoui, M., Nachtane, M., Trihi, M., and Laaouidi, H. (2021). A numerical investigation of the effects of ice accretion on the aerodynamic and structural behavior of offshore wind turbine blade. Wind Engineering, 45(6), 1433–1446.

Lamnatou, C., Cristofari, C., and Chemisana, D. (2024). Renewable energy sources as a catalyst for energy transition: Technological innovations and an example of the energy transition in France. Renewable Energy, 221, 119600.

Latif, A. A., Harun, S., Sajab, M. S., Markom, M., and Jahim, J. M. (2018). Ammonia-based pretreatment for ligno-cellulosic biomass conversion – an overview. Journal of Engineering Science and Technology, 13(6), 1595–1620.

Lim, Y., Al-Atabi, M., and Williams, R. A. (2016). Liquid air as an energy storage: A review. Journal of Engineering Science and Technology, 11(4), 496–515.

Ma, Y., Chen, C., Fan, T., Lu, H., and Fang, J. (2022). An innovative aerodynamic design methodology of wind turbine blade models for wind tunnel real-time hybrid tests based on genetic algorithm. Ocean Engineering, 257, 111724.

Magdy, G., Shabib, G., Elbaset, A. A., Kerdphol, T., Qudaih, Y., and Mitani, Y. (2019). Decentralized optimal LFC for a real hybrid power system considering renewable energy sources. Journal of Engineering Science and Technology, 14(2), 682–697.

Makinde, S. O., Ajani, Y. A., and Abdulrahman, M. R. (2024). Smart learning as transformative impact of technology: A paradigm for accomplishing sustainable development goals (SDGs) in education. Indonesian Journal of Educational Research and Technology, 4(3), 213–224.

Martini, F., Ilinca, A., Rizk, P., Ibrahim, H., and Issa, M. (2022). A survey of the quasi-3D modeling of wind turbine icing. Energies, 15(23), 8998.

Maryanti, R., Bayu, A., Nandiyanto, D., Hufad, A., Sunardi, S., Novia, D., Husaeni, A. L., and Fitria, D. (2023). A computational bibliometric analysis of science education research using vosviewer. Journal of Engineering Science and Technology, 18(1), 301–309.

Maryanti, R., Rahayu, N. I., Muktiarni, M., Al Husaeni, D. F., Hufad, A., Sunardi, S., and Nandiyanto, A. B. D. (2022). Sustainable development goals (SDGs) in science education: Definition, literature review, and bibliometric analysis. Journal of Engineering Science and Technology, 17, 161–181.

Mohamad, I. N., Rohani, R., Nor, M. T. M., Claassen, P., Muhammad, M. S., Mastar Masdar, M. S., and Rosli, M. I. (2017). An overview of gas-upgrading technologies for biohydrogen produced from treatment of palm oil mill effluent. Journal of Engineering Science and Technology, 12(3), 725–755.

Mohamed, O. S., Elbaz, A. M. R., and Bianchini, A. (2021). A better insight on physics involved in the self-starting of a straight-blade darrieus wind turbine by means of two-dimensional computational fluid dynamics. Journal of Wind Engineering and Industrial Aerodynamics, 218, 104793.

Mohamed, O. S., Melani, P. F., Balduzzi, F., Ferrara, G., and Bianchini, A. (2022). An insight on the key factors influencing the accuracy of the actuator line method for use in vertical-axis turbines: Limitations and open challenges. Energy Conversion and Management, 270, 116249.

Mokhtar, N. M., Ethaib, S., and Omar, R. (2018). Effects of microwave absorbers on the products of microwave pyrolysis of oily sludge. Journal of Engineering Science and Technology, 13(10), 3313–3330.

Molla, S., Farrok, O., and Alam, M. J. (2024). Electrical energy and the environment: Prospects and upcoming challenges of the World’s top leading countries. Renewable and Sustainable Energy Reviews, 191, 114177.

Nahar, N. M. (2009). Design and development of a large size non-tracking solar cooker. Journal of Engineering Science and Technology, 4(3), 264–271.

Naima, K., Liazid, A., Tazerout, M., and Bousbaa, H. (2018). Experimental and numerical investigation of combustion behaviour in diesel engine fuelled with waste polyethylene oil. Journal of Engineering Science and Technology, 13(10), 3204–3219.

Nakhchi, M. E., Naung, S. W., and Rahmati, M. (2021). High-resolution direct numerical simulations of flow structure and aerodynamic performance of wind turbine airfoil at wide range of reynolds numbers. Energy, 225, 120261.

Namasivayam, S., Al-Obaidi, A. S. M., and Fouladi, M. H. (2023). A conceptual curriculum design approach for educating engineers of and for the future. Indonesian Journal of Science and Technology, 8(3), 381–396.

Nandiyanto, A. B. D., and Al Husaeni, D. F. (2022). Bibliometric Analysis of Engineering Research Using Vosviewer Indexed By Google Scholar. Journal of Engineering Science and Technology, 17(2), 883–894.

Nandiyanto, A. B. D., Al Husaeni, D. F., Ragadhita, R., Fiandini, M., Maryanti, R., and Al Husaeni, D. N. (2023c). Computational calculation of adsorption isotherm characteristics of carbon microparticles prepared from mango seed waste to support sustainable development goals (SDGs). Journal of Engineering Science and Technology, 18(2), 913–930.

Nandiyanto, A. B. D., Al Husaeni, D. N., and Al Husaeni, D. F. (2021). A bibliometric analysis of chemical engineering research using vosviewer and its correlation with Covid-19 pandemic condition. Journal of Engineering Science and Technology, 16(6), 4414–4422.

Nandiyanto, A. B. D., Biddinika, M. K., and Triawan, F. (2020). Evaluation on research effectiveness in a subject area among top class universities: A case of Indonesia’s academic publication dataset on chemical and material sciences. Journal of Engineering Science and Technology, 15(3), 1747–1775.

Nandiyanto, A. B. D., Fatimah, S., Ragadhita, R., and Husaeni, D. N. Al. (2022). Particle size and pore size of rice husk ash on the resin-based brake pads performance: Experiments and bibliometric literature review. Journal of Engineering Science and Technology, 17(6), 4065–4081.

Nandiyanto, A. B. D., Fiandini, M., Fadiah, D. A., Muktakin, P. A., Ragadhita, R., Nugraha, W. C., Kurniawan, T., Bilad, M. R., Yunas, J., and Mahdi Al Obaidi, A. S. (2023a). Sustainable biochar carbon microparticles based on mangosteen peel as biosorbent for dye removal: Theoretical review, modelling, and adsorption isotherm characteristics. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105(1), 41–58.

Nandiyanto, A. B. D., Fitriani, A. F., Pradana, R. A., Ragadhita, R., Azzaoui, K., and Piantari, E. (2024b). Green innovation in brake pad production: Harnessing teak powder and clamshells as sustainable alternatives for subtractive residual waste to support sustainable development goals (SDGs). Moroccan Journal of Chemistry, 12(2), 714–733.

Nandiyanto, A. B. D., Ragadhita, R., Fiandini, M., Maryanti, R., Al Husaeni, D. N., and Al Husaeni, D. F. (2023b). Adsorption isotherm characteristics of calcium carbon microparticles prepared from chicken bone waste to support sustainable development goals (SDGs). Journal of Engineering Science and Technology, 18(2), 1363–1379.

Nandiyanto, A. B. D., Sucianto, R. N., Matildha, S. R., Nur, F. Z., Kaniawati, I., Kurniawan, T., Bilad, M. R., and Sidik, N. A. C. (2025). What phenomena happen during pyrolysis of plastic? FTIR AND GC-MS analysis of pyrolyzed low linear density polyethylene (LLDPE) polymer particles completed with bibliometric research trend and pyrolysis chemical reaction mechanism. Journal of Advanced Research in Applied Sciences and Engineering Technology, 46(1), 250–260.

Nandiyanto, A. B. D., Syazwany, A. N., Syarafah, K. N., Syuhada, T. S., Ragadhita, R., Piantari, E., Bilad, M. R., and Farobie, O. (2024a). Utilization of bamboo powder in the production of non-asbestos brake pads: Computational bibliometric literature review analysis and experiments to support sustainable development goals (SDGs). Automotive Experiences, 7(1), 111–131.

Nurramadhani, A., Riandi, R., Permanasari, A., and Suwarma, I. R. (2024). Low-carbon food consumption for solving climate change mitigation: Literature review with bibliometric and simple calculation application for cultivating sustainability consciousness in facing sustainable development goals (SDGs). Indonesian Journal of Science and Technology, 9(2), 261–286.

Omidi, J., and Mazaheri, K. (2020). Micro-plasma actuator mechanisms in interaction with fluid flow for wind energy applications: Physical parameters. Physics of Fluids, 32(7), 77107.

Papi, F., Balduzzi, F., Ferrara, G., and Bianchini, A. (2021). Uncertainty quantification on the effects of rain-induced erosion on annual energy production and performance of a Multi-MW wind turbine. Renewable Energy, 165, 701–715.

Pebrianti, M., and Salamah, F. (2021). Learning simple pyrolysis tools for turning plastic waste into fuel. Indonesian Journal of Multidiciplinary Research, 1(1), 99-102.

Ponta, F. L., Otero, A. D., Rajan, A., and Lago, L. I. (2014). The adaptive-blade concept in wind-power applications. Energy for Sustainable Development, 22(1), 3–12.

Ragadhita, R., Fiandini, M., Nofiani, R., Farobie, O., Nandiyanto, A. B. D., Hufad, A., Mudzakir, A., Nugraha, W. C., and Istadi, I. (2023). Biomass composition (cassava starch and banana (musa sp.) peels) on mechanical and biodegradability properties of bioplastics for supporting sustainable development goals (SDGs). Journal of Engineering Science and Technology, 18, 228–238.

Rahmah, F. A., Nurlaela, N., Anugrah, R., Aulia, Y., Putri, R., Agroindustri, P. T., Teknologi, P., and Kejuruan, D. (2024). Safe food treatment technology: The key to realizing the sustainable development goals (SDGs) zero hunger and optimal health asean journal of agriculture and food engineering. ASEAN Journal of Agriculture and Food Engineering, 3(1), 57–66.

Rahromostaqim, M., Posa, A., and Balaras, E. (2016). Numerical investigation of the performance of pitching airfoils at high amplitudes. AIAA Journal, 54(8), 2221–2232.

Ramdhani, M. R., Kholik, A., Fauziah, R. S. P., Roestamy, M., Suherman, I., and Nandiyanto, A. B. D. (2023). A comprehensive study on biochar production, bibliometric analysis, and collaborative teaching practicum for sustainable development goals (SDGs) in Islamic schools. Jurnal Pendidikan Islam, 9(2), 123–144.

Roestamy, M., Martin, A. Y., Hakim, A. L., and Purnomo, A. M. (2023). Bibliometric analysis of the legal issues relating to artificial intelligence technology in tourism. Journal of Engineering Science and Technology, 18(6), 9–16.

Rusyani, E., Maryanti, R., Muktiarni, M., and Nandiyanto, A. B. D. (2021). Teaching on the concept of energy to students with hearing impairment: Changes of electrical energy to light and heat. Journal of Engineering Science and Technology, 16(3), 2502–2517.

Said, A., Islam, M., Mohiuddin, A. K. M., and Idres, M. (2019). Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering, 7(6), 153–157.

Saini, A., Narsipur, S., and Gopalarathnam, A. (2021). Leading-edge flow sensing for detection of vortex shedding from airfoils in unsteady flows. Physics of Fluids, 33(8), 087105.

Sakti, A. W., Masunah, J., Karyono, T., and Narawati, T. (2024). the future of beauty innovations in face reconstruction and airbrush makeup technology completed with bibliometric analysis. Journal of Engineering Science and Technology, 19(2), 618–628.

Salah, W. A., and Abuhelwa, M. (2020). Review of thermoelectric cooling devices recent applications. Journal of Engineering Science and Technology, 15(1), 455–476.

Saleem, A., and Kim, M. H. (2019). Effect of rotor tip clearance on the aerodynamic performance of an aerofoil-based ducted wind turbine. Energy Conversion and Management, 201, 112186.

Saleem, M. E., Omar, R., Kamal, S. M. M., and Biak, D. R. A. (2015). Microwave-assisted pretreatment of lignocellulosic biomass: A review. Journal of Engineering Science and Technology, 10, 97–109.

Saminan, N. F., Suhandi, A., Kaniawati, I., Riandi, R., Saminan, S., Khairul, M., and Novia, N. (2023). Digital content contribution of earth and space phenomena to science during 2003-2023: Bibliometric analysis. Journal of Engineering Science and Technology, 18(6), 91–99.

Santamaría, L., Galdo Vega, M., Pandal, A., González Pérez, J., Velarde-Suárez, S., and Fernández Oro, J. M. (2022). Aerodynamic performance of VAWT airfoils: Comparison between wind tunnel testing using a new three-component strain gauge balance and CFD modelling. Energies, 15(24), 9351.

Saputra, H., Fauzan, T. A., and Dharmayanti, D. (2023). Bibliometric analysis of near field communication technology using vosviewer application with publish or perish. Journal of Engineering Science and Technology, 18(6), 3155–3166.

Shafiq, D. A., Sh, A. M., Al-Obaidi, S., Gunasagaran, T., and Salvi, M. (2024). Empowering engineering female students to improve retention and progression: A program evaluation study completed with bibliometric analysis. Indonesian Journal of Science and Technology, 9(2), 373–394.

Sharma, D., and Goyal, R. (2023). Methodologies to improve the performance of vertical axis wind turbine: A review on stall formation and mitigation. Sustainable Energy Technologies and Assessments, 60, 103561.

Sher, F., Smječanin, N., Hrnjić, H., Bakunić, E., and Sulejmanović, J. (2024). Prospects of renewable energy potentials and development in Bosnia and Herzegovina–A review. Renewable and Sustainable Energy Reviews, 189, 113929.

Shi, W., Fu, J., Ren, Z., Jiang, Z., Wang, T., Cui, L., and Li, X. (2023). Real-time hybrid model tests of floating offshore wind turbines: Status, challenges, and future trends. Applied Ocean Research, 141, 103796.

Singh, A. P., and Agrawal, H. (2018). A fractional model predictive control design for 2-D gantry crane system. Journal of Engineering Science and Technology, 13(7), 2224–2235.

Srinivasan, G. R., Palani, S., and Jambulingam, R. (2018). Biodiesel production from waste animal fat using a novel catalyst HCA immobilized AuNPS amine grafted SBA-15. Journal of Engineering Science and Technology, 13(8), 2632–2643.

Supriyadi, S., Suhandi, A., Samsudin, A., Setiawan, A., Algiranto, A., and Loupatty, M. (2023). Trends on augmented reality in education: bibliometric analysis and visualization using R studio. Journal of Engineering Science and Technology, 18(6), 61–69.

Susilawati, A., Kustiawan, I., Rochintaniawati, D., and Hasanah, L. (2023). Research trends about stem of internet of things for science teachers: A bibliometric analysis. Journal of Engineering Science and Technology, 18(6), 41–50.

Tong, G., Li, Y., Tagawa, K., and Feng, F. (2023). Effects of blade airfoil chord length and rotor diameter on aerodynamic performance of straight-bladed vertical axis wind turbines by numerical simulation. Energy, 265, 126325.

Uranai, S., Fukudome, K., Mamori, H., Fukushima, N., and Yamamoto, M. (2020). Numerical simulation of the anti-icing performance of electric heaters for icing on the NACA 0012 airfoil. Aerospace, 7(9), 1–15.

Vesel, R. W., and McNamara, J. J. (2014). Performance enhancement and load reduction of a 5MW wind turbine blade. Renewable Energy, 66, 391–401.

Wang, X., Cai, C., Zhou, T., Yang, Y., Chen, Y., Wang, T., Hou, C., Zhou, S., and Li, Q. (2023). A new similarity criterion and design method for wind tunnel model tests of floating offshore wind turbines. Energy Conversion and Management, 277, 116560.

Wiendartun, W., Wulandari, C., Fauzan, J. N., Hasanah, L., Setyo Nugroho, H., Pawinanto, R. E., and Mulyanti, B. (2022). A bibliometric and knowledge mapping analysis. Journal of Engineering Science and Technology, 17(1), 343–0360.

Wu, B., Zhan, M., Wu, R., and Zhang, X. (2023). The investigation of a coaxial twin-counter-rotating turbine with variable-pitch adaptive blades. Energy, 267, 126546.

Yang, H., Chen, J., Pang, X., and Chen, G. (2019). A new aero-structural optimization method for wind turbine blades used in low wind speed areas. Composite Structures, 207, 446–459.

Yossri, W., Ayed, S. B., and Abdelkefi, A. (2021). Airfoil type and blade size effects on the aerodynamic performance of small-scale wind turbines: Computational fluid dynamics investigation. Energy, 229, 120739.

Yuan, W., Lee, R., Hoogkamp, E., and Khalid, M. (2010). Numerical and experimental simulations of flapping wings. International Journal of Micro Air Vehicles, 2(3), 181–209.

Zhang, Y., Zhang, M., and Cai, C. (2019). Flow control on wind turbine airfoil affected by the surface roughness using leading-edge protuberance. Journal of Renewable and Sustainable Energy, 11(6), 63304.

Zhao, Y., Zhong, C., Wang, F., and Wang, Y. (2022). Visual explainable convolutional neural network for aerodynamic coefficient prediction. International Journal of Aerospace Engineering, 2022(1), 9873112.

Zhu, C., Qiu, Y., Feng, Y., Wang, T., and Li, H. (2022). Combined effect of passive vortex generators and leading-edge roughness on dynamic stall of the wind turbine airfoil. Energy Conversion and Management, 251, 115015.




DOI: https://doi.org/10.17509/ijost.v9i3.72369

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Universitas Pendidikan Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Science and Technology is published by UPI.
StatCounter - Free Web Tracker and Counter
View My Stats