The Concise Latest Report on the Advantages and Disadvantages of Pure Biodiesel (B100) on Engine Performance: Literature Review and Bibliometric Analysis

Muji Setiyo, Dori Yuvenda, Olusegun David Samuel

Abstract


Currently, many countries are promoting B100 as the main fuel for diesel engines towards the transition to 100% renewable energy applications. However, due to its properties, B100 has both advantages and disadvantages to replace diesel oil. Therefore, a bibliometric analysis was carried out to evaluate the performance and emissions of a diesel engine with the B100 being tested on a multi-cylinder diesel engine for cars. Unfortunately, only 12 of the 127 selected articles are eligible to be reviewed in detail and none of them discusses all the key performance of diesel engines which include Brake Thermal Efficiency (BTE), Specific Fuel Consumption (SFC), Cylinder Pressure (CPs), Heat Release Rate (HRR), NOx, and smoke. Through data synthesis, we found that the use of B100 provides advantages in engine noise, thermal efficiency, specific fuel consumption, and emissions under certain engine loads. On the other hand, it also has the potential to result in poorer performance, if there is no modification to engine components and the addition of additives. As a recommendation, the results of this analysis provide a guide for further research to examine the use of B100 with all diesel engine performance variables. Research paths can be developed with the wider potential to provide new arguments on various diesel engine technologies, engine capacities, B100 raw materials, and test environments.


Keywords


B100; Bibliometric analysis; Brake thermal efficiency; Cylinder pressure; Heat release rate; NOx; Smoke; Specific fuel consumption

Full Text:

PDF

References


Abdalla, I. E. (2018). Experimental studies for the thermo-physiochemical properties of biodiesel and its blends and the performance of such fuels in a compression ignition engine. Fuel, 212, 638–655.

Ajith, B. S., Math, M. C., Patel, G. C. M., and Parappagoudar, M. B. (2021). Engine performance and exhaust emissions of Garcinia gummi-gutta based biodiesel–diesel and ethanol blends. SN Applied Sciences, 3(5), 1–11.

Altaie, M. A. H. (2020). Performance and emission analysis of enriched biodiesel and its combined blends with petrodiesel. Biofuels, 11(3), 251-260.

Al Husaeni, D. F., and Nandiyanto, A. B. D. (2022). bibliometric using vosviewer with publish or perish (using google scholar data): From step-by-step processing for users to the practical examples in the analysis of digital learning articles in pre and post Covid-19 pandemic. ASEAN Journal of Science and Engineering, 2(1), 19–46.

Anderhofstadt, B., and Spinler, S. (2020). Preferences for autonomous and alternative fuel-powered heavy-duty trucks in Germany. Transportation Research Part D: Transport and Environment, 79, 102232.

Arifin, A. C., Aminudin, A., and Putra, R. M. (2019). Diesel-biodiesel blend on engine performance: An experimental study. Automotive Experiences, 2(3), 91–96.

Arun, S. B., Suresh, R., and Yatish, K. V. (2020). Study of performance, combustion and emission characteristics of heterogeneous catalyzed yellow oleander biodiesel on Compression Ignition (CI) engine. Biofuels, 11(7), 793-800.

Atabani, A. E., Silitonga, A. S., Badruddin, I. A., Mahlia, T. M. I., Masjuki, H. H., and Mekhilef, S. (2012). A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renewable and Sustainable Energy Reviews, 16(4), 2070–2093.

Aydın, S. (2020). Detailed evaluation of combustion, performance and emissions of ethyl proxitol and methyl proxitol-safflower biodiesel blends in a power generator diesel engine. Fuel, 270, 117492.

Ayu, D., Aulyana, R., Astuti, E. W., Kusmiyati, K., and Hidayati, N. (2019). Catalytic transesterification of used cooking oil to biodiesel: Effect of oil-methanol molar ratio and reaction time. Automotive Experiences, 2(3), 73–77.

Azizah, N. N., Maryanti, R., and Nandiyanto, A. B. D. How to search and manage references with a specific referencing style using google scholar: From step-by-step processing for users to the practical examples in the referencing education. Indonesian Journal of Multidiciplinary Research, 1(2), 267-294.

Balasubramanian, D., Hoang, A. T., Papla Venugopal, I., Shanmugam, A., Gao, J., and Wongwuttanasatian, T. (2021). Numerical and experimental evaluation on the pooled effect of waste cooking oil biodiesel/diesel blends and exhaust gas recirculation in a twin-cylinder diesel engine. Fuel, 287, 119815.

Bhattarai, K., Stalick, W. M., Mckay, S., Geme, G., and Bhattarai, N. (2011). Biofuel: An alternative to fossil fuel for alleviating world energy and economic crises. Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, 46(12), 1424–1442.

Bruederle, A., and Hodler, R. (2019). Effect of oil spills on infant mortality in Nigeria. Proceedings of the National Academy of Sciences of the United States of America, 116(12), 5467–5471.

Bukkarapu, K. R. (2019). Comparative study of different biodiesel–diesel blends. International Journal of Ambient Energy, 40(3), 295–303.

Chettouh, S., Hamzi, R., and Benaroua, K. (2016). Examination of fire and related accidents in Skikda Oil Refinery for the period 2002–2013. Journal of Loss Prevention in the Process Industries, 41, 186–193.

de Souza Ferreira Filho, J. B., and Horridge, M. (2014). Ethanol expansion and indirect land use change in Brazil. Land Use Policy, 36, 595–604.

Esonye, C., Onukwuli, O. D., Ofoefule, A. U., and Ogah, E. O. (2019). Multi-input multi-output (MIMO) ANN and Nelder-Mead’s simplex based modeling of engine performance and combustion emission characteristics of biodiesel-diesel blend in CI diesel engine. Applied Thermal Engineering, 151, 100–114.

Fadhlullah, M., Widiyanto, S. N. B., and Restiawaty, E. (2015). The potential of nyamplung (Calophyllum inophyllum L.) seed oil as biodiesel feedstock: Effect of seed moisture content and particle size on oil yield. Energy Procedia, 68, 177–185.

Fajar, R., and Setiapraja, H. (2014). The influence of injection timing on performance characteristics of diesel engine using jatropha biodiesel with and without partial hydrogenation. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 5(1), 59.

Fauzan, N. A., Tan, E. S., Pua, F. L., and Muthaiyah, G. (2020). Physiochemical properties evaluation of Calophyllum inophyllum biodiesel for gas turbine application. South African Journal of Chemical Engineering, 32, 56–61.

Firoz, S. (2017). A review: Advantages and disadvantages of biodiesel. International Research Journal of Engineering and Technology, 4(11), 530–535.

Franta, B. (2021). Early oil industry disinformation on global warming. Environmental Politics, 30(4), 663–668.

García-Martín, J. F., Barrios, C. C., Alés-Álvarez, F. J., Dominguez-Sáez, A., and Alvarez-Mateos, P. (2018). Biodiesel production from waste cooking oil in an oscillatory flow reactor. Performance as a fuel on a TDI diesel engine. Renewable Energy, 125, 546–556.

Ge, J. C., Kim, H. Y., Yoon, S. K., and Choi, N. J. (2020). Optimization of palm oil biodiesel blends and engine operating parameters to improve performance and PM morphology in a common rail direct injection diesel engine. Fuel, 260, 116326.

Ghadikolaei, M. A., Wei, L., Cheung, C. S., and Yung, K. F. (2019). Effects of engine load and biodiesel content on performance and regulated and unregulated emissions of a diesel engine using contour-plot map. Science of the Total Environment, 658, 1117–1130.

Ginanjar Ahmad Zakky, W. R. M. (2020). Civil society and global governance: The indirect participation of extinction rebellion in global governance on climate change. Journal of Contemporary Governance and Public Policy, 1(1), 41–52.

Hadiyanto, H., Aini, A. P., Widayat, W., Kusmiyati, K., Budiman, A., and Rosyadi, A. (2020). Multi-feedstock biodiesel production from esterification of Calophyllum inophyllum oil, castor oil, palm oil, and waste cooking oil. International Journal of Renewable Energy Development, 9(1), 119–123.

Hamidah, I., Sriyono, S., and Hudha, M. N. (2020). A Bibliometric analysis of Covid-19 research using VOSviewer. Indonesian Journal of Science and Technology, 5(2), 209–216.

Hariyanto, R. A. B., Firmansyah, R. A., Burhan, R. Y. P., and Zetra, Y. (2021). Synthesis of bio-additive for low sulphur diesel: Transesterification of soybean oil and ethylene glycol using K2CO3 catalyst. Automotive Experiences, 4(1), 44–50.

Harnani, H. (2018). Kajian tingkat pencemaran minyak bumi akibat pengeboran ilegal berdasarkan pemetaan sungai sumur dan fisika-kimia air studi kasus: Kecamatan Keluang Kabupaten Musi Banyuasin Sumatera Selatan. PROMINE, 6(2), 16–23.

Hidayat, A., Kurniawan, W., and Hinode, H. Sugarcane bagasse biochar as a solid catalyst: From literature review of heterogeneous catalysts for esterifications to the experiments for biodiesel synthesis from palm oil industry waste residue. Indonesian Journal of Science and Technology, 6(2), 337-352.

Hojati, A., and Shirneshan, A. (2020). Effect of compression ratio variation and waste cooking oil methyl ester on the combustion and emission characteristics of an engine. Energy and Environment, 31(7), 1257–1280.

Isik, M. Z. (2021). Comparative experimental investigation on the effects of heavy alcohols- safflower biodiesel blends on combustion, performance and emissions in a power generator diesel engine. Applied Thermal Engineering, 184(2021), 116142.

Kaniapan, S., Hassan, S., Ya, H., Nesan, K. P., and Azeem, M. (2021). The utilisation of palm oil and oil palm residues and the related challenges as a sustainable alternative in biofuel, bioenergy, and transportation sector: A review. Sustainability (Switzerland), 13(6).

Kolakoti, A., Setiyo, M., and Waluyo, B. (2021). Biodiesel production from waste cooking oil: Characterization, modeling and optimization. Mechanical Engineering for Society and Industry, 1(1), 22–30.

Kumar, A., and Subramanian, K. A. (2020). Experimental investigation on effects of karanja biodiesel (B100) on performance, combustion, and regulated and GHG emissions characteristics of an automotive diesel engine. Biofuels, 11(3), 239-250.

Mahlia, T. M. I., Syazmi, Z. A. H. S., Mofijur, M., Abas, A. E. P., Bilad, M. R., Ong, H. C., and Silitonga, A. S. (2020). Patent landscape review on biodiesel production: Technology updates. Renewable and Sustainable Energy Reviews, 118, 109526.

Marlina, E., Basjir, M., Ichiyanagi, M., Suzuki, T., Gotama, G. J., and Anggono, W. (2020). The role of eucalyptus oil in crude palm oil as biodiesel fuel. Automotive Experiences, 3(1), 33–38.

Mudombi, S., Nyambane, A., von Maltitz, G. P., Gasparatos, A., Johnson, F. X., Chenene, M. L., and Attanassov, B. (2018). User perceptions about the adoption and use of ethanol fuel and cookstoves in Maputo, Mozambique. Energy for Sustainable Development, 44, 97–108.

Nanlohy, H. Y., Riupassa, H., Rasta, I. M., and Yamaguchi, M. (2020). An experimental study on the ignition behavior of blended fuels droplets with crude coconut oil and liquid metal catalyst. Automotive Experiences, 3(2), 39-45.

Odibi, C., Babaie, M., Zare, A., Nabi, M. N., Bodisco, T. A., and Brown, R. J. (2019). Exergy analysis of a diesel engine with waste cooking biodiesel and triacetin. Energy Conversion and Management, 198, 111912.

Örs, İ., Sarıkoç, S., Atabani, A. E., and Ünalan, S. (2020). Experimental investigation of effects on performance, emissions and combustion parameters of biodiesel–diesel–butanol blends in a direct-injection CI engine. Biofuels, 11(2), 121–134.

Pambudi, S., Ilminnafik, N., Junus, S., and Kustanto, M. N. (2021). Experimental study on the effect of nano additives γAl2O3 and equivalence ratio to bunsen flame characteristic of biodiesel from nyamplung (calophyllum inophyllum). Automotive Experiences, 4(2), 51–61.

Panoutsou, C., Germer, S., Karka, P., Papadokostantakis, S., Kroyan, Y., Wojcieszyk, M., Maniatis, K., Marchand, P., and Landalv, I. (2021). Advanced biofuels to decarbonise European transport by 2030: Markets, challenges, and policies that impact their successful market uptake. Energy Strategy Reviews, 34(2021), 100633.

Rameshbabu, A., Bhaskaran, A., Sudharsanam, M., and Prabhu, A. (2020). Performance, combustion and emission characteristics of a single-cylinder constant speed compression ignition engine using soybean methyl esters. International Journal of Ambient Energy, 41(4), 457–461.

Santos, T. B., Ferreira, V. P., Torres, E. A., da Silva, J. A. M., and Ordonez, J. C. (2017). Energy analysis and exhaust emissions of a stationary engine fueled with diesel–biodiesel blends at variable loads. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(8), 3237–3247.

Shao, Y., and Dessouky, M. (2020). A routing model and solution approach for alternative fuel vehicles with consideration of the fixed fueling time. Computers and Industrial Engineering, 142, 106364.

Silitonga, A. S., Masjuki, H. H., Ong, H. C., Yusaf, T., Kusumo, F., and Mahlia, T. M. I. (2016). Synthesis and optimization of Hevea brasiliensis and Ricinus communis as feedstock for biodiesel production: A comparative study. Industrial Crops and Products, 85, 274–286.

Sinaga, L. C. (2020). Assessing the commitment of indonesian government towards climate change policy: The Yudhoyono presidency 2004-2014 [menilai komitmen pemerintah indonesia terhadap kebijakan perubahan iklim: Pemerintahan presiden Yudhoyono 2004-2014]. Jurnal Politica, 11(2), 163–182.

Singh, R., Singh, S., and Kumar, M. (2020). Impact of n-butanol as an additive with eucalyptus biodiesel-diesel blends on the performance and emission parameters of the diesel engine. Fuel, 277, 118178.

Soares, M. de O., Teixeira, C. E. P., Bezerra, L. E. A., Paiva, S. V., Tavares, T. C. L., Garcia, T. M., de Araújo, J. T., Campos, C. C., Ferreira, S. M. C., Matthews-Cascon, H., Frota, A., Mont’Alverne, T. C. F., Silva, S. T., Rabelo, E. F., Barroso, C. X., Freitas, J. E. P. de, Melo Júnior, M. de, Campelo, R. P. de S., Santana, C. S., Cavalcante, R. M. (2020). Oil spill in South Atlantic (Brazil): Environmental and governmental disaster. Marine Policy, 115(2020), 103879.

Sudarmanta, B., Mahanggi, A. A. K., Yuvenda, D., and Soebagyo, H. (2020). Optimization of injection pressure and injection timing on fuel sprays, engine performances and emissions on a developed DI 20c biodiesel engine prototype. International Journal of Heat and Technology, 38(4), 827–838.

Sunaryo, S., Sesotyo, P. A., Saputra, E., and Sasmito, A. P. (2021). Performance and Fuel consumption of diesel engine fueled by diesel fuel and waste plastic oil blends: An experimental investigation. Automotive Experiences, 4(1), 20–26.

Supriyadi, S., and Purwanto, P. (2018). Enhancing biodiesel from kemiri sunan oil manufacturing using ultrasonics. E3S Web of Conferences, 31, 2014.

Supriyanto, Ismanto, and Suwito, N. (2019). Zeolit alam sebagai katalis pyrolisis limbah ban bekas menjadi bahan bakar cair [natural zeolite as pyrolisis catalyst of used tires into liquid fuels]. Automotive Experiences, 2(1), 15–21.

Thangaraja, J., and Srinivasan, V. (2019). Techno-economic assessment of coconut biodiesel as a potential alternative fuel for compression ignition engines. Environmental Science and Pollution Research, 26(9), 8650–8664.

Tosun, E., and Özcanlı, M. (2021). Hydrogen enrichment effects on performance and emission characteristics of a diesel engine operated with diesel-soybean biodiesel blends with nanoparticle addition. Engineering Science and Technology, an International Journal, 24(3), 648–654.

Viswanathan, K., Ashok, B., and Pugazhendhi, A. (2020). Comprehensive study of engine characteristics of novel biodiesel from curry leaf (Murraya koenigii) oil in ceramic layered diesel engine. Fuel, 280, 118586.

Vohra, M., Manwar, J., Manmode, R., Padgilwar, S., and Patil, S. (2014). Bioethanol production: Feedstock and current technologies. Journal of Environmental Chemical Engineering, 2(1), 573–584.

Wahyu, M., Rahmad, H., and Gotama, G. J. (2019). Effect of cassava biogasoline on fuel consumption and CO exhaust emissions. Automotive Experiences, 2(3), 97–103.

Waluyo, B., Wardana, I. N. G., Yuliati, L., Sasongko, M. N., and Setiyo, M. (2020). The role of polar ethanol induction in various iso-octane ethanol fuel blend during single droplet combustion. Fuel Processing Technology, 199, 106275.

Yatish, K. V, Prakash, R. M., Ningaraju, C., Sakar, M., GeethaBalakrishna, R., and Lalithamba, H. S. (2021). Terminalia chebula as a novel green source for the synthesis of copper oxide nanoparticles and as feedstock for biodiesel production and its application on diesel engine. Energy, 215, 119165.

Yusoff, M. N. A. M., Zulkifli, N. W. M., Sukiman, N. L., Chyuan, O. H., Hassan, M. H., Hasnul, M. H., Zulkifli, M. S. A., Abbas, M. M., and Zakaria, M. Z. (2021). Sustainability of palm biodiesel in transportation: a review on biofuel standard, policy and international collaboration between Malaysia and Colombia. Bioenergy Research, 14(1), 43–60.

Zetra, Y., Sholihah, S. M. W., Burhan, R. Y. P., and Firmansyah, R. A. (2021). Synthesis and characterization of diesel lubricity enhancer through transesterification reaction of palm oil with 1, 2-ethanediol. Automotive Experiences, 4(2), 104–111.




DOI: https://doi.org/10.17509/ijost.v6i3.38430

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Indonesian Journal of Science and Technology

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Science and Technology is published by UPI.
StatCounter - Free Web Tracker and Counter
View My Stats