The Influence of Hot Forming on the Microstructure and Corrosion Behaviour of AZ31B Magnesium Alloys
Abstract
The influence of the hot forming process of AZ31B wrought and twin roll cast (TRC) magnesium alloy sheets on the microstructure and corrosion behaviour have been evaluated. The corrosion behaviour was investigated by hydrogen evolution experiments in chloride-containing solution. Filiform-like corrosion was predominant attack to the AZ31 magnesium alloys, as observed by in-situ corrosion observation. The intermetallic particle existence and grain structure significantly influenced the corrosion rate. The dendritic structure of the as-cast TRC alloy was severely attacked, revealing that the as-cast alloy was highly susceptible to corrosion. The presence of twins in wrought alloy was found to act as a corrosion barrier, while the increase in grain size showed the high corrosion rate of the alloy.
Keywords
Full Text:
PDFReferences
Alias, J., Zhou, X., Das, S., El-Fakir, O., & Thompson, G. E. (2017). Microstructure evolution and texture development of hot form-quench (HFQ) AZ31 twin roll cast (TRC) magnesium alloy. AIP Conference Proceedings, 1901(1), 130005.
Ambat, R., Aung, N. N., & Zhou, W. (2000). Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy. Corrosion Science, 42(8), 1433-1455.
Aung, N. N., & Zhou, W. (2010). Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy. Corrosion Science, 52(2), 589-594.
Bayandorian, I., Huang, Y., Fan, Z., Pawar, S., Zhou, X., & Thompson, G. E. (2012). The impact of melt-conditioned twin-roll casting on the downstream processing of an AZ31 magnesium alloy. Metallurgical and Materials Transactions A, 43(3), 1035-1047.
Garrett, R. P., Lin, J., & Dean, T. A. (2005). Solution heat treatment and cold die quenching in forming AA 6xxx sheet components: feasibility study. In Advanced materials research(Vol. 6, pp. 673-680). Trans Tech Publications.
Máthis, K., Horváth, K., Farkas, G., Choe, H., Shin, K.S., Vinogradov, A. (2018). Investigation of the microstructure evolution and deformation mechanisms of a Mg-Zn-Zr-RE twin-roll-cast magnesium sheet by in-situ experimental techniques. Materials, 11(2), 200.
Matsubara, H., Ichige, Y., Fujita, K., Nishiyama, H., & Hodouchi, K. (2013). Effect of impurity Fe on corrosion behavior of AM50 and AM60 magnesium alloys. Corrosion Science, 66, 203-210.
Pardo, A., Merino, M. C., Coy, A. E., Arrabal, R., Viejo, F., & Matykina, E. (2008). Corrosion behaviour of magnesium/aluminium alloys in 3.5 wt.% NaCl. Corrosion Science, 50(3), 823-834.
Park, S. S., Bae, G. T., Kang, D. H., Jung, I. H., Shin, K. S., & Kim, N. J. (2007). Microstructure and tensile properties of twin-roll cast Mg–Zn–Mn–Al alloys. Scripta Materialia, 57(9), 793-796.
Song, G., Atrens, A., & Dargusch, M. (1999). Influence of microstructure on the corrosion of diecast AZ91D. Corrosion Science 30, 249-273.
Song, G. L. (2012). The effect of texture on the corrosion behavior of AZ31 Mg alloy. Jom, 64(6), 671-679.
Song, G. L., & Atrens, A. (1999). Corrosion mechanisms of magnesium alloys. Advanced engineering materials, 1(1), 11-33.
Song, G. L., & Xu, Z. (2012). Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution. Corrosion Science, 54, 97-105.
Wang, L., Strangwood, M., Balint, D., Lin, J., & Dean, T. A. (2011). Formability and failure mechanisms of AA2024 under hot forming conditions. Materials Science and Engineering: A, 528(6), 2648-2656.
Watari, H., Haga, T., Koga, N., & Davey, K. (2007). Feasibility study of twin roll casting process for magnesium alloys. Journal of Materials Processing Technology, 192, 300-305.
Witte, F., Fischer, J., Nellesen, J., Crostack, H. A., Kaese, V., Pisch, A., & Windhagen, H. (2006). In vitro and in vivo corrosion measurements of magnesium alloys. Biomaterials, 27(7), 1013-1018.
Witte, F., Fischer, J., Nellesen, J., Crostack, H. A., Kaese, V., Pisch, A., Beckmanne, F., & Windhagen, H. (2006). In vitro and in vivo corrosion measurements of magnesium alloys. Biomaterials, 27(7), 1013-1018.
DOI: https://doi.org/10.17509/ijost.v3i2.12758
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 Indonesian Journal of Science and Technology
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Indonesian Journal of Science and Technology is published by UPI.
View My Stats