Seismic Performance of a Tailings Dam Located in Hight Seismicity Area

Nestor G. Bellido, Zenón Aguilar

Abstract


The seismic behavior of tailings dams is significantly influenced by the response of stored mine tailings to cyclic loading. Given recent global failures of tailings storage facilities (TSFs), understanding the mechanical properties of various mine tailings is crucial for enhancing dam safety. This study presents a seismic evaluation of a polymetallic tailings dam situated in a region of high seismicity. Nonlinear deformation analyses (NDAs) were conducted using advanced constitutive models: PM4Silt (designed to simulate the behavior of clay and plastic silts under cyclic loading, with an emphasis on excess pore pressure generation) and UBCHyst (developed to model soils that do not generate excess pore pressure during cyclic loading). Both models were implemented using the FLAC finite difference software. The geotechnical characterization of the tailings was based on static and cyclic laboratory tests performed on remolded samples. In line with South American standards, seven-time histories were developed to simulate the maximum credible earthquake (MCE) for the dynamic analyses. Results from the NDAs showed that deformation patterns at the dam crest after the earthquake were heavily affected by the characteristics of the mine tailings. This study underscores the necessity of employing a variety of design ground motions to accurately assess the dynamic response of tailings dams.

Keywords


Computational geotechnics; PM4Silt constitutive model; Seismic engineering; Tailings dam

Full Text:

PDF

References


Al Atik, L., and Abrahamson, N. (2010). An Improved method for nonstationary spectral matching. Earthquake Spectra, 26(3), 601–617.

Armstrong, R., Kishida, T., and Park, D. (2021). Efficiency of ground motion intensity measures with earthquake-induced earth dam deformations. Earthquake Spectra, 37(1), 5–25.

Arnold, C., and Macedo, J. (2024). A novel experimental database on the cyclic response of mine tailings. Earthquake Spectra, 40(1), 828–846.

Barton, N., and Kjaersnli, B. (1981). Shear strength of rockfill. Journal of the Geotechnical Engineering Division, 107(GT7), 873–891.

Boulanger, R. W., Montgomery, J., and Ziotopoulou, K. (2015). Nonlinear Deformation Analyses of Liquefaction Effects on Embankment Dams. In: Ansal, A., Sakr, M. (Eds), Perspectives on Earthquake Geotechnical Engineering. Geotechnical, Geological and Earthquake Engineering, 2015, 247-283.

Bray, J. D., Macedo, J., and Travasarou, T. (2018). Simplified procedure for estimating seismic slope displacements for subduction zone earthquakes. Journal of Geotechnical and Geoenvironmental Engineering, 144(3), 04017124.

Cerna-Diaz, A., Kafash, M., Davidson, R., Yenne, L., and Doughty, P. (2023). Nonlinear deformation analyses of a tailings dam during a Mw5.7 earthquake. Geo-Congress 2023, 70–85.

Gazetas, G., and Dakoulas, P. (1992). Seismic analysis and design of rockfill dams: state-of-the-art. Soil Dynamics and Earthquake Engineering, 11(1), 27–61.

Kiernan, M., and Montgomery, J. (2020). Numerical Simulations of Fourth Avenue Landslide Considering Cyclic Softening. Journal of Geotechnical and Geoenvironmental Engineering, 146(10), 04020099.

Kuhlemeyer, R. L., and Lysmer, J. (1973). Finite Element Method Accuracy for Wave Propagation Problems. Journal of the Soil Mechanics and Foundations Division, 99(5), 421–427.

Labanda, N. A., Sottile, M. G., Cueto, I. A., and Sfriso, A. O. (2021). Screening of seismic records to perform time-history dynamic analyses of tailings dams: A power-spectral based approach. Soil Dynamics and Earthquake Engineering, 146, 106750.

Leps, T. M. (1970). Review of shearing strength of rockfill. Journal of the Soil Mechanics and Foundation Division, 96(4), 1159–1170.

Macedo, J., Abrahamson, N., and Bray, J. D. (2019). Arias intensity conditional scaling ground‐motion models for subduction zones. Bulletin of the Seismological Society of America, 109(4), 1343–1357.

Macedo, J., and Vergaray, L. (2022). Properties of mine tailings for static liquefaction assessment. Canadian Geotechnical Journal, 59(5), 667–687.

Macedo, J., Bray, J. D., and Liu, C. (2023). Seismic slope displacement procedure for interface and intraslab subduction zone earthquakes. Journal of Geotechnical and Geoenvironmental Engineering, 149(11), 04023104.

Macedo, J., Torres, P., Vergaray, L., Paihua, S., and Arnold, C. (2022). Dynamic effective stress analysis of a centreline tailings dam under subduction earthquakes. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 175(2), 224–246.

Mánica, M., Ovando, E., and Botero, E. (2014). Assessment of damping models in FLAC. Computers and Geotechnics, 59, 12–20.

Martinez, M., and Hull, A. (2019). Toward a common practice in the selection of earthquake ground motion criteria for the design of critical mining facilities at closure and post-closure. Proceedings of the International Conference on Mine Closure, 2019, 249–262.

Mazzoni, S., Kishida, T., Stewart, J. P., Contreras, V., Darragh, R. B., Ancheta, T. D., Chiou, B. S., Silva, W. J., and Bozorgnia, Y. (2022). Relational database used for ground-motion model development in the NGA-sub project. Earthquake Spectra, 38(2), 1529–1548.

Mejia, L. H., Montgomery, J., Beaty, M., Armstrong, R., and Abbaszadeh, S. (2024). USSD guidelines on analysis of seismic deformations of embankment dams. Geo-Congress 2024, 152–161.

Park, D., and Kishida, T. (2018). Shear wave velocity profiles of fill dams. Soil Dynamics and Earthquake Engineering, 104, 250–258.

Paull, N. A., Boulanger, R. W., and DeJong, J. T. (2020). Accounting for spatial variability in nonlinear dynamic analyses of embankment dams on liquefiable deposits. Journal of Geotechnical and Geoenvironmental Engineering, 146(11), 04020124.

Pretell, R., Ziotopoulou, K., and Davis, C. A. (2021). Liquefaction and cyclic softening at balboa boulevard during the 1994 Northridge earthquake. Journal of Geotechnical and Geoenvironmental Engineering, 147(2), 05020014.

Rollins, K. M., Singh, M., and Roy, J. (2020). Simplified equations for shear-modulus degradation and damping of gravels. Journal of Geotechnical and Geoenvironmental Engineering, 146(9), 04020076.

Salam, S., Xiao, M., Khosravifar, A., and Ziotopoulou, K. (2021). Seismic stability of coal tailings dams with spatially variable and liquefiable coal tailings using pore pressure plasticity models. Computers and Geotechnics, 132, 104017.

Seed, H. B., Wong, R. T., Idriss, I. M., and Tokimatsu, K. (1986). Moduli and damping factors for dynamic analyses of cohesionless soils. Journal of Geotechnical Engineering, 112(11), 1016–1032.

Vergaray, L., and Macedo, J. (2024). Mechanical response of mine tailings under constant shear drained loading. Journal of Geotechnical and Geoenvironmental Engineering, 150(10), 04024082.

Vergaray, L., Macedo, J., and Arnold, C. (2023). Static and cyclic liquefaction of copper mine tailings. Journal of Geotechnical and Geoenvironmental Engineering, 149(5), 04023021.




DOI: https://doi.org/10.17509/ajse.v4i3.75557

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Universitas Pendidikan Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ASEAN Journal of Science and Engineering (AJSE) is published by UPI 

View My Stats