ANALYSIS THE EFFECT OF CAMSHAFT WITH LSA 244,5° AND ECU REMAP ON PERFORMANCE AND EXHAUST GASES ON BBS1 TYPE ENGINE

M. Ariq Yusran

Abstract


Good engine performance is very important for people who like to travel long distances or touring on their motorbikes. . In an effort to improve engine performance, there are several steps that can be taken, namely changing or modifying the camshaft in the valve system. The aim of this research is to analyze the effect of using a camshaft with a larger LSA on the performance of BBS1 motorbikes and to determine the effect of ECU re-map on power, torque and fuel consumption on BBS1 motorbikes. This research was carried out experimentally through testing using a dynotest. For this test, a Yamaha The research results show that the use of LSA 244,5° camshaft variations and ECU re-map can increase torque & power, but increases fuel consumption.


Full Text:

PDF

References


Arismunandar, W. (2005). Motor Bakar Torak. Bandung: ITB Bandung.

Bröring, A., Remke, A., Stasch, C., Autermann, C., Rieke, M., & Möllers, J. (2015). enviroCar: A Citizen Science Platform for Analyzing and Mapping Crowd‐Sourced Car Sensor Data. Transactions in GIS, 19(3), 362-376.

Dantes, K. R., & Wiratmaja, I. G. (2022). Pengaruh Variasi Derajat Lobe Separation Angle Camshaft Terhadap Torsi, Daya Dan Konsumsi Bahan Bakar Pada Motor Bensin 4 Langkah. Jurnal Pendidikan Teknik engine Undiksha, 10(2), 148-157.

Jama, J., & Wagino, W. (2008). Teknik Sepeda Motor. Direktorat Pembinaan Sekolah Menengah Kejuruan. https://doi. org/10.1017/CBO9781107415324, 4, 58-75.

Kim, S., & Kim, J. (2017). Development of a Driver-Oriented Engine Control Unit (ECU)-Mapping System With BigData Analysis. IEMEK Journal of Embedded Systems and Applications, 12(4), 247-258.

Lee, W., & Ohm, I. (2001). Effects of the method of changing compression ratio on engine performance in an SI engine. Transaction of Korea Society of Automotive Engineers, 9(4), 27-33.

Marsudi, M. T. (2016). Buku Pintar Teknisi Otodidak Sepeda Motor Matic. Yogyakarta: Andi.

Mintoro, S. (2017, November). Optimasi Kinerja ECU (Electronic Control Unit) Melalui Pemrograman Remapping Pada engine EFI. In Prosiding Seminar Nasional Darmajaya (Vol. 1, No. 1, pp. 458-471).

Philip, K. (2015). Motor Bakar Torak Teori & Aplikasinya. Yogyakarta: Penerbit Andi.

Rahman, M. D., Wigraha, N. A., & Widayana, G. (2017). Pengaruh ukuran katup terhadap torsi dan daya pada sepeda motor honda supra fit. Jurnal Pendidikan Teknik engine Undiksha, 5(3).

Siswanto, Y. D. (2012). Pengaruh variasi lobe separation angle camshaft dan variasi putaran engine terhadap daya pada sepeda motor Honda Supra X 125 Tahun 2008.

Suarnata, P. P., Dantes, K. R., & Wigraha, N. A. (2017). Perbandingan penggunaan koil standar dan koil racing KTC terhadap daya engine dan konsumsi bahan bakar pada sepeda motor Yamaha Mio tahun 2006. Jurnal Pendidikan Teknik engine Undiksha, 5(3).

Sukidjo, F. X. (2008). Pengaruh Durasi Camshaft terhadap Konsumsi Bahan Bakar, Emisi Gas Buang, Torsi dan Daya engine pada engine Bensin. In Forum Teknik (Vol. 32, No. 2008).

Susilo, A. (2013). Pengaruh Besar Lsa (Lobe Separation Angle) Pada Camshaft Terhadap Unjuk Kerja engine Sepeda Motor 4 Langkah. Jurnal Teknik engine, 245-250.

Wahyu Hidayat, S. T. (2012). Motor Bensin Modern. HS WAHYU, Motor Bensin Modern, 269.

Wiryawan, P. N., Widayana, G., & Dantes, K. R. (2017). Pengaruh Perbandingan Penggunaan Bahan Bakar Pertalite dan Bahan Bakar Gas LPG terhadap Unjuk Kerja Motor Bakar Bensin 4 Tak Pada Motor Honda Supra Fit. Jurnal Pendidikan Teknik engine Undiksha, 5(2).


Refbacks

  • There are currently no refbacks.


© 2024 MOTOR: Journal of Automotive Engineering