Email this article 
A Review on Phase Change Materials Incorporation in Asphalt Pavement
Abstract
Phase Change Material (later to be referred as PCM) has been successfully utilized in some areas. PCM has emerged as one of the materials for pavement temperature reducing due to its latent heat. Some research has been done regarding this topic. The objective of this paper is to review the development of PCM in asphalt pavement. The review has shown that organic PCM appears as the favourite PCM in asphalt concrete studies. Choice of porous material depends on method of incorporation. Reduction of temperature in PCM-asphalt mixture compared to conventional one is undoubtable. However, the mechanical performance of PCM-asphalt mixture need to be explored.
Keywords
Full Text:
PDFReferences
Agyenim., Francis., Neil, H., Philip, E., & Mervyn, S. (2010). A Review of Materials, Heat Transfer and Phase Change Problem Formulation for Latent Heat Thermal Energy Storage Systems (LHTESS). Renewable and Sustainable Energy Reviews 14(2), 615–28. h
Akeiber., Hussein., Payam, Nejat, Muhd, Z. A. M., Mazlan, A. W., Fatemeh., Jomehzadeh., Iman Z. F., John, K. C., Ben, R. H., & Sheikh, A. Z. (2016). A Review on Phase Change Material (PCM) for Sustainable Passive Cooling in Building Envelopes. Renewable and Sustainable Energy Reviews 60, 1470–97.
Benrazavi., Rezvan, S., Kamariah, B. D., Norsidah, U., & Nour, S. B. (2016). Effect of Pavement Materials on Surface Temperatures in Tropical Environment. Sustainable Cities and Society 22 (Supplement C), 94–103.
Bian, X., Yi, Q. T., Jian, F. L., & Li, Y. S. (2012). Preparation of Latent Heat Materials Used in Asphalt Pavement and Theirs’ Controlling Temperature Performance. Advanced Engineering Forum 5, 322–27.
Biao, M., Adhikari, S., Chang, Y., Ren, J., Liu, J., & You, Z. (2013). Preparation of Composite Shape-Stabilized Phase Change Materials for Highway Pavements. Construction and Building Materials 42, 114–21.
Biao, M., Si, W., Ren, J., Wang, H., Liu, F., & Li, Jun. (2014). Exploration of Road Temperature Adjustment Material in Asphalt Mixture. Road Materials and Pavement Design 15(3), 659–73.
Chen, M.Z., Jing, H., Shao, P.W., Wan, Lu., & Guang, J. X. (2011). Optimization of Phase Change Materials Used in Asphalt Pavement to Prevent Rutting. Advanced Materials Research 219–220, 1375–78.
Chen M., Lu, W., & Juntao, L. (2012). Effect of Phase-Change Materials on Thermal and Mechanical Properties of Asphalt Mixtures. Journal of Testing and Evaluation 40(5), 746–53.
“Development and Testing of PCM Doped Cool Colored Coatings to Mitigate Urban Heat Island and Cool Buildings - ScienceDirect.” n.d. Accessed September 19, 2017. http://www.sciencedirect.com/science/article/pii/S0360132310002738.
Guan, B., Biao, M., & Fang, Q. (2011). Application of Asphalt Pavement with Phase Change Materials to Mitigate Urban Heat Island Effect. In 2011 International Symposium on Water Resource and Environmental Protection 3, 2389–92.
Harrington, W. Z., Strohschein, B. L., David, R., Jennifer, E., Harrington, J., & William, R. S. (1995). Pavement Temperature and Burns: Streets of Fire. Annals of Emergency Medicine 26(5), 563–68.
Kheradmand, M., João, C. G., Miguel, A., Pedro, D. S., José, L. B., de, Aguiar., & Salah, E. Z. (2015). Assessing the Feasibility of Impregnating Phase Change Materials in Lightweight Aggregate for Development of Thermal Energy Storage Systems. Construction and Building Materials 89, 48–59.
Ma, B., Sha, S. W., & Jun, Li. (2011). Study on Application of PCM in Asphalt Mixture. Advanced Materials Research 168, 2625–30.
Ma, B., Xue-Yan, Z., Jiang, L., Zhanping, Y., Kun, W., & Xiao-Feng, H. (2016). Determination of Specific Heat Capacity on Composite Shape-Stabilized Phase Change Materials and Asphalt Mixtures by Heat Exchange System. Materials (Basel, Switzerland) 9(5).
Mallick, R. B., Bao-Liang, Chen., & Sankha, B. (2009). Harvesting Energy from Asphalt Pavements and Reducing the Heat Island Effect. International Journal of Sustainable Engineering 2(3), 214–28.
Manning, B. J., Paul, R. B., Sarah, A. C., Rachel, A. L., Aaron, R. S., & Rajib, B. M. (2015). Assessing the Feasibility of Incorporating Phase Change Material in Hot Mix Asphalt. Sustainable Cities and Society 19, 11–16.
Mills, B. N., Tighe, S. L., Andrey, J., Smith, J. T., & Huen, K. (2009). Climate Change Implications for Flexible Pavement Design and Performance in Southern Canada. Journal of Transportation Engineering 135(10), 773–82.
“Reducing Urban Heat Islands.” 2012. EPA. https://www.epa.gov/sites/production/files/2017-05/documents/reducing_urban_heat_islands_ch_5.pdf.
Ren, J., Biao, M., Wei, S., Xueyan, Z., & Chao, L. (2014). Preparation and Analysis of Composite Phase Change Material Used in Asphalt Mixture by Sol–Gel Method. Construction and Building Materials 71, 53–62.
Ryms, M., Hubert, D., & Piotr, J. (2017). Thermal Stabilization and Permanent Deformation Resistance of LWA/PCM-Modified Asphalt Road Surfaces. Construction and Building Materials 142, 328–41.
Ryms, M., Lewandowski, W. M., Klugmann-Radziemska, E., Hubert, D., & Patrycja, W. (2015). The Use of Lightweight Aggregate Saturated with PCM as a Temperature Stabilizing Material for Road Surfaces. Applied Thermal Engineering 81, 313–24.
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009). Review on Thermal Energy Storage with Phase Change Materials and Applications. Renewable and Sustainable Energy Reviews 13(2), 318–45.
DOI: https://doi.org/10.17509/ijost.v3i2.12762
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 Indonesian Journal of Science and Technology
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Indonesian Journal of Science and Technology is published by UPI.
View My Stats