Design of Shell and Tube Heat Exchanger for Magnetite (Fe3o4) Particle Production Process

Agung Slamet Nugraha, Asep Bayu Dani Nandiyanto

Abstract


Shell and tube heat exchangers are one of the most widely used types of heat exchangers in industry. The low cost of manufacture and use is one of the reasons this heat exchanger is widely used. The purpose of this research is to design a shell and tube heat exchanger (two-pass) type for application in the production of magnetite particles on an industrial scale. To design a heat exchanger, the method used is mathematical calculations using more than 20 equations that are used which are derived based on the influence of dimensional and fluid specifications. In the production of magnetite particles, two heat exchangers are used, namely the reaction process and the crystallization process. The results of this study indicate the effectiveness of the two heat exchangers designed to have a high enough value and exceed 70%. This high effectiveness value indicates that both heat exchangers have good performance. Therefore, this design has the potential to be applied to the magnetite particle synthesis process on an industrial scale.

Keywords


Effectiveness; Heat exchanger; Potential; Shell and tube

Full Text:

PDF

References


Lukitobudi, A., Akbarzade, A., Johnson, P. W., and Hendy, P. (1995). Design, construction and testing of a thermosyphon heat exchanger for medium temperature heat recovery in bakeries. Heat Recovery System and HCP, 15(5), 481–491.

Meng, H., Zhang, Z., Zhao, F., Qiu, T., and Yang, J. (2013). Orthogonal optimization design for preparation of Fe 3 O 4 nanoparticles via chemical coprecipitation. Applied Surface Science, 280(5), 679–685.

Mukherjee, R. (1998). Effectively design shell-and-tube heat exchangers. Chemical Engineering Progress, 94(2), 21-37.

Patel, V. K., and Rao, R. V. (2010). Design optimization of shell-and-tube heat exchanger using particle swarm optimization technique. Applied Thermal Engineering, 30(11–12), 1417–1425.

Septian, B., Aziz, A., and Rey, P. D. (2021). Desain dan rancang bangun alat penukar kalor (heat exchanger) jenis shell dan tube. Jurnal Baut dan Manufaktur, 03(1), 53–60.

Singh, S. K., and Sarkar, J. (2020). Improving hydrothermal performance of hybrid nanofluid in double tube heat exchanger using tapered wire coil turbulator. Advanced Powder Technology, 31(5), 2092-2100.




DOI: https://doi.org/10.17509/ijomr.v3i1.43333

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Kantor Jurnal dan Publikasi, Universitas Pendidikan Indonesia (UPI)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

View My Stats

Indonesian Journal of Multidiciplinary Research (IJOMR) is published by Universitas Pendidikan Indonesia (UPI)