Design of Styrofoam Cutting Machine Based on CNC 2 Axis Using Hot Wire

Fahrizal Fahrizal, Muhammad Fikriatul Aslam, Nurhikmah Anwar, Isminarti Isminarti, Andi Fitriati

Abstract


The development of the creative industry in the manufacture of decorations from styrofoam materials is increasing rapidly, the need for a 2-axis CNC-based automatic styrofoam cutting machine (Computer Numerical Control) using hot wire can facilitate the process of cutting styrofoam in large quantities and uniformly with machine drive on the X and Y axes. The purpose of this study is to design and manufacture a CNC based styrofoam cutting machine that can be programmed so that it can facilitate the cutting of styrofoam in large quantities and uniformly with movement on the X and Y axes. The method used is an experimental method in which the G-Code processing process is sent to the software which then produces 2 axis movements, namely on the X and Y axes. Then the styrofoam cutting process is continued using a hot wire whose temperature has been regulated using voltage and current which produces styrofoam cutting according to the size of the styrofoam used, which is 88 cm long, 42 cm high with a thickness of 2 cm and the accuracy level obtained for the X axis of 99.84% and the Y axis of 99.91%.


Keywords


CNC; G-Code, Hot Wire; Motor Stepper; Styrofoam Cutting Machine

Full Text:

PDF

References


Yang, B., Zhang, G., Ran, Y., and Yu, H. (2019). Kinematic modeling and machining precision analysis of multi-axis CNC machine tools based on screw theory. Mechanism and Machine Theory, 140(1), 538-552.

Mohammed, I. Q., and Kadhum, A. H. (2019). Optimizing the parameters of hot-wire CNC machine to enhance the cutting of plastic foam. Al-Khwarizmi Engineering Journal, 15(3), 29-37.

Ilman, A. F. (2021). Rancang bangun mesin pemotong tulisan dengan bahan styrofoam. Techno Bahari, 8(1), 1-6.

Kurniawan, E., Syaifurrahman, S., dan Jekky, B. (2020). Rancang bangun mesin CNC lathe mini 2 axis. Jurnal Engine: Energi, Manufaktur, dan Material, 4(2), 83-90.

Ye, Y., Hu, T., Zhang, C., and Luo, W. (2018). Design and development of a CNC machining process knowledge base using cloud technology. The International Journal of Advanced Manufacturing Technology, 94(1), 3413-3425.

Mohammed, I. Q., and Kadhum, A. H. (2019). Optimizing the parameters of hot-wire CNC machine to enhance the cutting of plastic foam. Al-Khwarizmi Engineering Journal, 15(3), 29-37.

Xu, K., Li, Y., Liu, C., Liu, X., Hao, X., Gao, J., and Maropoulos, P. G. (2020). Advanced data collection and analysis in data-driven manufacturing process. Chinese Journal of Mechanical Engineering, 33(1), 1-21.

Dunaj, P., Marchelek, K., and Chodźko, M. (2019). Application of the finite element method in the milling process stability diagnosis. Journal of Theoretical and Applied Mechanics, 57(2), 353-367.

Syafiq, N., dan Hayati, E. N. (2020). Perancangan dan pengembangan alat pemotong styrofoam semi otomatis menggunakan metode rula di desa Kalisari. Dinamika Teknik Industri, 8(1), 43-52.

Choirony, I. V., Hariyanto, M. S., Ulum, M., Ubaidillah, A., Haryanto, H., dan Alfita, R. (2021). Rancang bangun acrylic engraver and cutting machine menggunakan CNC milling 3 axis berbasis mikrokontroler. Elektrika, 13(1), 13-21.

Amin, C., dan Purwanto, L. M. F. (2022). Peran computer numeric control (CNC) pada karya arsitektur the role of computer numeric control in architecture works. SARGA: Journal of Architecture and Urbanism, 16(2), 44-55.

Syahriza, S., dan Firsa, T. (2021). Rancang bangun CNC foam cutter dengan gerakan 3 axis untuk pemotongan dekorasi styrofoam. Jurnal Teknik Mesin, 9(1), 13-19.

Hegde, N. T., George, V. I., Nayak, C. G., and Vaz, A. C. (2021). Application of robust h-infinity controller in transition flight modeling of autonomous VTOL convertible quad tiltrotor UAV. International Journal of Intelligent Unmanned Systems, 9(3), 204-235.

Wei, Y., Hu, T., Zhou, T., Ye, Y., and Luo, W. (2021). Consistency retention method for CNC machine tool digital twin model. Journal of Manufacturing Systems, 58(2), 313-322.

Lv, Y., Li, C., Jin, Y., He, J., and Li, J. (2021). Energy saving design of the spindle of CNC lathe by structural optimization. The International Journal of Advanced Manufacturing Technology, 114(1), 541-562.

Lyu, D., Liu, Q., Liu, H., and Zhao, W. (2020). Dynamic error of CNC machine tools: a state-of-the-art review. The International Journal of Advanced Manufacturing Technology, 106(1), 1869-1891.

Zhang, J., Ding, J., Li, Q., Jiang, Z., Ding, Q., Du, L., and Wang, W. (2019). A new contouring error estimation for the high form accuracy of a multi-axis CNC machine tool. The International Journal of Advanced Manufacturing Technology, 101(1), 1403-1421.

Geng, Z., Tong, Z., and Jiang, X. (2021). Review of geometric error measurement and compensation techniques of ultra-precision machine tools. Light: Advanced Manufacturing, 2(2), 211-227.

Jiang, Z., Gao, D., Lu, Y., Kong, L., and Shang, Z. (2019). Electrical energy consumption of CNC machine tools based on empirical modeling. The International Journal of Advanced Manufacturing Technology, 100(1), 2255-2267.

Hasabe, A., Hakde, A., Khandagle, A., and Surve, K. (2019). Single minute exchange of dies (SMED) concept. International Research Journal of Engineering and Technology (IRJET), 6(4), 4665-4669.




DOI: https://doi.org/10.17509/coelite.v1i2.51617

Refbacks

  • There are currently no refbacks.


Journal of Computer Engineering, Electronics and Information Technology (COELITE)


is published by UNIVERSITAS PENDIDIKAN INDONESIA (UPI),
and managed by Department of Computer Enginering.
Jl. Dr. Setiabudi No.229, Kota Bandung, Indonesia - 40154
email: coelite@upi.edu
e-ISSN: 2829-4149
p-ISSN: 2829-4157