Mathematical Modeling of Static and Dynamic Stresses in the Construction of the Load-Handling Frame of a Stationary Hoist During the Loading of Grain Cargo into Containers: Literature Review and Experiments

Oyum Balabayev, Aidana Kassymzhanova, Marat Ibatov, Valentin Mikhailov, Bakhtiyar Askarov

Abstract


The export of grains plays a pivotal role in the global economy, and the implementation of efficient container loading systems is of paramount importance for reducing time and resource expenditure. This study aims to develop a stationary hoist designed for loading grain into containers for railway transportation. The application of direct integration and matrix force methods enabled the calculation of static and dynamic stresses in the load-handling frame. Simulations of the container filling process were conducted to evaluate the dependency of time and speed on the results. The results demonstrated that the maximum normal stresses satisfied the strength conditions, while dynamic stresses were calculated based on the falling height of the grain. The findings revealed a relationship between the hole radius in downcomer pipes and the container filling time, providing valuable insights for optimizing hoist operation. The research offers practical relevance for grain producers, transportation companies, and researchers, contributing to more efficient grain loading and transportation.

Keywords


Harvesting and Transport Complex; Load Planning; Machinery; Optimization; Railway Transportation; Unitized Load

Full Text:

PDF

References


Ambrosino, D., Caballini, C., and Siri, S. (2013). A mathematical model to evaluate different train loading and stacking policies in a container terminal. Maritime Economics and Logistics, 15, 292-308.

Barbieri, E., and Botto, L. (2022). Peeling under large bending deformations: Follower versus fixed loads. A unified approach for concentrated or distributed loads. International Journal of Solids and Structures, 241, 111450.

Bruns, F., and Knust, S. (2012). Optimized load planning of trains in intermodal transportation. OR Spectrum, 34(3), 511-533.

Bulgakov, V., Nikolaenko, S., Holovach, I., Adamchuk, V., Kiurchev, S., Ivanovs, S., and Olt, J. (2020). Theory of grain mixture particle motion during aspiration separation. Agronomy Research, 18(1), 18-37.

Dyer, M., Gorucu, S., Bock, R., Thomas, R., Liu, J., and Fetzer, L. (2023). Case study: Modeling a grain bin for safe entry retrofit. Safety, 9(2), 28.

Galkin, A., Obolentseva, L., Balandina, I., Kush, E., Karpenko, V., and Bajdor, P. (2019). Last-mile delivery for consumer driven logistics. Transportation Research Procedia, 39, 74-83.

Horabik, J., Parafiniuk, P., and Molenda, M. (2016). Experiments and discrete element method simulations of distribution of static load of grain bedding at bottom of shallow model silo. Biosystems Engineering, 149, 60-71.

Ibatov, M.K., Balabaev, and O.T., Kassymzhanova, A.D. (2021). Studying the method of loading containers by testing in the software environment. Material and Mechanical Engineering Technology, 4, 35-38.

Ilesaliev, D.I., Azimov, F.K., Shikhnazarov, J.A., and Dehkonov, M.M. (2021). Intermodal and multimodal technologies for transportation of grain cargo. Silk Road Transport, 4, 54-69.

Jakubik, P., Kerimkhulle, S., and Teleuova, S. (2017). How to anticipate recession via transport indices. Ekonomicky Casopis, 65(10), 972-990.

Jiang, S., Nolan, J., and Wilson, W.W. (2022). Exit decisions in the Canadian grain elevator industry. Journal of Industry, Competition and Trade, 22, 1-19.

Kashkanov, A., and Moskaliuk, M. (2024). Methods of justification of spare parts stocks in the transport process management system. Journal of Mechanical Engineering and Transport, 10(1), 68-74.

Kassymzhanova, A.D., Ibatov, M.K., Balabayev, O.T., Donenbaev, B.S., and Ilessaliyev, D.I. (2022). Experimental study of maximum stresses in the stationary hoist design in the ANSYS software environment. Communications, 24(4), 310-318.

Kuzmenko, O.V., Dotsenko, T.V., and Skrynka, L.O. (2021). Economic and mathematical modeling of the effectiveness of the national system for countering cyber fraud and criminal proceeds legalisation based on survival analysis methods. Scientific Bulletin of Mukachevo State University. Series “Economics”, 8(1), 144-153.

Liu, Z., Jiang, C., Evans, J.T., Dhamankar, S., Heusinger, L.J., Shaver, G.M., and Puryk, C.M. (2022). A computationally efficient model for granular material piling in a container. Computers and Electronics in Agriculture, 194, 106692.

Lupoiu, F., Pleşca, A.T., Gabor, G., and Chiriac, G. (2020). A new solution of electronic device proposed for cereals, vegetables and fruits storage. In 2020 International Conference and Exposition on Electrical and Power Engineering (EPE) (pp. 403-406). Iasi: IEEE.

Mizanbekov, I., Bekbosynov, S., and Lytkina, L. (2023). Factors affecting the cost of grain transportation in the conditions of Northern Kazakhstan. Bulletin of the L.N. Gumilyov Eurasian National University, 142(1), 137-145.

Musayev, J., Zhauyt, A., Bahtiyar, B., Kibitova, R., Kazhet, K., Kussyov, A., and Kabylkarim, A. (2022). Analysis of dynamic instability of the wheel set of a railway vehicle using the method of generalized hill determinants. Vibroengineering Procedia, 41, 186-190.

Ng, M., and Talley, W.K. (2020). Rail intermodal management at marine container terminals: Loading double stack trains. Transportation Research Part C-Emerging Technologies, 112(3), 252-259.

Nussibaliyeva, A., Sergazin, G., Tursunbayeva, G., Uzbekbayev, A., Zhetenbayev, N., Nurgizat, Y., Bakhtiyar, B., Orazaliyeva, S., and Yussupova, S. (2024). Development of an artificial vision for a parallel manipulator using machine-to-machine technologies. Sensors, 24(12), 3792.

Otenko, V., Malyarets, L., Barannik, I., and Budarin, O. (2023). Determining the economic sustainability reserve of economic entities in modern operating conditions. Economics of Development, 22(2), 8-18.

Ruzmetov, Y., and Valieva, D. (2021). Specialized railway carriage for grain. E3S Web of Conferences, 264, 05059.

Sinoimeri, D., Teta, J., Prifti, V., and Lazaj, A. (2024). Information technology in supply chain management. case study. Lecture Notes on Multidisciplinary Industrial Engineering, 2090, 35-44.

Wilson, W.W., and Dahl, B. (2011). Grain pricing and transportation: Dynamics and changes in markets. Agribusiness, 27(4), 420-434.

Zhao, J.H., Zhu, X.N., and Wang, L. (2020). Study on scheme of outbound railway container organization in rail-water intermodal transportation. Sustainability, 12(4), 1519.




DOI: https://doi.org/10.17509/ajse.v4i3.76031

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Universitas Pendidikan Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ASEAN Journal of Science and Engineering (AJSE) is published by UPI 

View My Stats