Modelling and Control of a Small Domestic Wind Turbine

Hakima Cherif, Abderrahmane Khechekhouche, Madiha Maamir, Hania Aboub, Basim Belgasim

Abstract


A wind turbine is a machine that converts the kinetic energy of wind into mechanical energy like wind turbines. This mechanical wind power has been used through the ages to pump water or grind grain. Current machines are used to produce wind-type electricity which is consumed locally (isolated sites), or injected into the electricity network (wind turbines connected to the network). In this work, we are only interested in the modelling of a three-bladed horizontal axis wind turbine. All the models were developed by the Matlab/Simulink software, which makes it possible to set up fairly quickly models as well as the associated. The results revealed that the wind profile ranges between 6-7 (m/s), the power coefficient Cp for a pitch angle of =2 has an average value of 0.54 with a relative speed λ value of 6.40, and when the origin of electrical losses is ignored, the electrical power equals the electromagnetic power, and the mechanical speed is stable between (70-80 rd/s).

Keywords


Control; Electrical energy; Kinetic energy; Matlab/Simulink software; Wind speed

Full Text:

PDF

References


Albert, M. Urban, and Raúl Guanche. (2019). Wind turbine aerodynamics scale-modeling for floating offshore wind platform testing. Journal of Wind Engineering and Industrial Aerodynamics, 186, 49-57.

Asadi, M., and Pourhossein, K. (2021). Wind farm site selection considering turbulence intensity. Energy, 236, 121480.

Ghodbane, M., Benmenine, D., Khechekhouche, A., and Boumeddane, B. (2020). Brief on solar concentrators: differences and applications, instrumentation. Instumentation, Mesures, Métrologies, 19, 371-378.

Hadjadj, A., Benhaoua, B., Atia, A., Khechekhouche, A., Lebbihiat, N., and Rouag, A. (2020). Air velocity effect on geothermal helicoidally water-air heat exchanger under El Oued climate, Algeria. Thermal Science and Engineering Progress, 20, 100548.

Hur, S. H (2018). Modelling and control of a wind turbine and farm. Energy, 156, 360-370.

Khechekhouche, A., Elsharif, N., Kermerchou, I., and Sadoun, A. (2019). Construction and performance evaluation of a conventional solar distiller. Heritage and Sustainable Development, 1(2), 72-77.

Khechekhouche, A., Ghodbane, M., Kemerchou, I., Hodza, A., and Sadoun, A. (2021). Reynolds horizontal and vertical test bench from an educational point of view. Indonesian Journal of Educational Research and Technology, 1(2), 81-86.

Leisten C., Jassmann U., Balshüsemann J., and Abel, D. (2018). Model predictive speed control of a wind turbine system test bench. IFAC-Papers Online, 51(32), 349-354.

Martinez, A., and Iglesias, G. (2022). Mapping of the levelised cost of energy for floating offshore wind in the European Atlantic. Renewable and Sustainable Energy Reviews, 154, 111889.

Pavlowsky, C. E., and Gliedt, T. (2021). Individual and local scale interactions and adaptations to wind energy development: A case study of Oklahoma, USA. Geography and Sustainability, 2(3), 175-181.

Saidi Y, Mezoua A, Miloud Y., Benmahdjoub M. A., and Yahiaoui M. (2018). Modeling and comparative study of speed sensor and sensor-less based on TSR-MPPT method for PMSG-WT applications. International Journal of Energetica, 3(2), 6-12.

Taghinezhad, J., Alimardani, R., Masdari, M., and Mahmoodi, E. (2021). Performance optimization of a dual-rotor ducted wind turbine by using response surface method. Energy Conversion and Management: X, 12, 100120.

Wang, Q., Cheng, Y., Garg, A., and Zhu, Z. (2019). Characteristics of local wind pressure distribution and global aerodynamic forces on a vertical forest. Ecological Engineering, 138, 61-70.

Yang, B., Yu, T., Shu, H, Dong, J., and Jiang, L. (2018). Robust sliding-mode control of wind energy conversion systems for optimal power extraction via nonlinear perturbation observers. Applied Energy, 210, 711-723.

Yeter, B., and Garbatov, Y. (2022). Structural integrity assessment of fixed support structures for offshore wind turbines: A review. Ocean Engineering, 244, 110271.

Zhou, F., and Liu J. (2018). Pitch controller design of wind turbine based on nonlinear PI/PD control. Shock and Vibration, 2018, 1-14.

Zhou, T., Cao, H., Zhang, M., and Liao, C. (2022). Performance simulation of wind turbine with optimal designed trailing-edge serrations. Energy, 243, 122998.




DOI: https://doi.org/10.17509/ajse.v3i1.44725

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Universitas Pendidikan Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ASEAN Journal of Science and Engineering (AJSE) is published by UPI 

View My Stats